Hi,
I'm currently deploying PXE boot. I'm using infoblox as DHCP/DNS server. My client which should boot from PXE is on a different subnet than the DHCP and PXE server. My PXE server is also on a different vlan/subnet than my DHCP server and PXEclient. DHCP request are relayed to the infoblox DHCP server by the switch. The infoblox DHCP is configured according to following screenshots:
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
My client is getting the BStrap.0 file from the PXE server and starts booting. However, it just keeps on building up a dotted line for about 15 minutes and eventually fails with "PXE-E74 No MAN_INFO or OS_INFO options found".
When I fire up wireshark to sniff my client (using a hub), and on the PXE server to sniff the server to see if packets actually arrive on both sides, I get boot requests from my client and icmp replies from the server. This process keeps on going untill the client fails booting. I get these results as well on the client side as on the server side so I can assume that both sides can reach eachother. Here's a screenshot of my wireshark output:
Image may be NSFW.
Clik here to view.
I have tried out all possible fixes I could find on Symantec connect, and even on some other communities. None of them solved the problem. Any help would be very much appreciated, pulling my hair out here... :-)
Thanks in advance
